Mostrar el registro sencillo del ítem

dc.contributor.authorSouto, Ricardo Manuel 
dc.contributor.authorPähler, Maike
dc.contributor.authorSantana, Juan José
dc.contributor.authorSchuhmann, Wolfgang
dc.date.accessioned2020-03-30T11:05:37Z
dc.date.available2020-03-30T11:05:37Z
dc.date.issued2011es_ES
dc.identifier.urihttp://riull.ull.es/xmlui/handle/915/19130
dc.description.abstractThe suitability of frequency-dependent alternating-current scanning electrochemical microscopy (4D AC-SECM) for the investigation of the thin passivating layers covering the surface of corrosion-inhibited metals has been demonstrated. The inhibition of copper corrosion by benzotriazole (BTAH) and methyl-benzotriazole (MBTAH), which are effective inhibitors for this metal in many environmental conditions, was investigated. Strong dependencies were found for the AC z-approach curves with both the duration of the inhibitor treatment and the frequency of the AC excitation signal applied in AC-SECM. Both negative and positive feedback behaviours were observed in the AC approach curves for untreated copper and for Cu-BTAH and Cu-MBTAH samples. Negative feedback behaviour occurred in the low frequency range, whereas the positive feedback effect was observed at higher frequencies. A threshold frequency related to the passage from negative to positive regimes could be determined in each case. The value of the threshold frequency for inhibitor-modified samples was found always to be significantly higher than for the untreated metal, because the inhibitor film provides electrical insulation for the surface. Moreover, the threshold frequency increased with greater surface coverage by the inhibitor. 3D AC-SECM was successfully applied to visualizing spatially-resolved differences in the local electrochemical activity between inhibitor-free and inhibitor-covered areas of the sampleen
dc.format.mimetypeapplication/pdf
dc.language.isoenes_ES
dc.relation.ispartofseriesChemistry, A European Journal, 17, 905-911 (2011)es_ES
dc.rightsLicencia Creative Commons (Reconocimiento-No comercial-Sin obras derivadas 4.0 Internacional)
dc.rights.urihttps://creativecommons.org/licenses/by-nc-nd/4.0/deed.es_ES
dc.titleApplication of AC-SECM in Corrosion Science - Local visualisation of inhibitor films on active metals for corrosion protectionen
dc.typeinfo:eu-repo/semantics/article
dc.identifier.doi10.1002/chem.201000689


Ficheros en el ítem

Este ítem aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro sencillo del ítem

Licencia Creative Commons (Reconocimiento-No comercial-Sin obras derivadas 4.0 Internacional)
Excepto si se señala otra cosa, la licencia del ítem se describe como Licencia Creative Commons (Reconocimiento-No comercial-Sin obras derivadas 4.0 Internacional)