Diseño y cálculo de unas patas articuladas que sirvan para el movimiento de una máquina tipo ROV
Fecha
2020Resumen
This work is defined as an engineering development. In particular, a
modular ROV is designed from scratch, with special emphasis on the mechanical
study of the movement system.
In this project, the problem to be solved is the inspection of a cement pipe
that has vertical and horizontal sections with slight turning radius. In addition, the
longest pipe is ten meters long and it is necessary to monitor the inside of the
pipe.
Each pre-designed component is proposed following mechanical,
geometric, dimensional and functional rules. As for the movement system, its
design is based on a bar linkage or mechanism supplied by a lead screw. In
addition, the control of the ROV's movement is possible thanks to the load cells
that are attached to the bars. Thus, the load cells command three stepper motors
that transmit energy to the lead screws.
In addition, the working stress states, the stress instructions from the load
cells to the motors (for switching from one step to another), and the resistance of
the motion system are calculated.
Finally, it is worth mentioning a spring design due to its unusual tensions
and arrangement, being a joint.