RT info:eu-repo/semantics/masterThesis
T1 Caracterización de la cámara CAMELOT2
A1 Madrigal Aguado, Alberto
A2 Máster Universitario en Astrofísica
AB This work reflects the results of the complete characterization of CAMELOT2 (from inspanish CAmara MEjorada Ligera del OT) and is focused on determinate the best wayto carry out the observations and pull out the best of this telescope. CAMELOT2 is thecommon user instrument of the IAC80 telescope, at the Teide Observatory. The IAC80telescope has 82 cm of aperture and at its cassegrain focus is placed CAMELOT2, aninstrument with a detector made by Spectral Instruments. It is a 4kx4k back illuminatedCCD which operates in the optical wavelength range. It has a huge collection of  lters whichincludes SDSS griz, Johnson UBVRI, Str omgrem uvby standards and many narrow  lters.The pixels size is 15   which implies a pixel scale on-sky of 0.336 arcsec/pix. The theoretical eld of view must be 22 x 22 arcsminutes2 but, due to the vignetting caused by the  lters,the useful  eld of view is 10.6 x 10.6 arcminutes2. Due to this problem, all the analysishad to been carried out in the unvignetted region. In order to get a low readout time andlow readout noise, the common use observing modes have 4 channels. Because of this, weperformed all the tests for each individual channel and then we computed the mean for the4 channels. A verifcation of the linearity response in all common observing modes was made. An important amount of images with at illumination and increasing exposure times were taken. It is clearly visible that all modes o er a satisfactory linear behavior. The saturationcounts for every mode were determined and the maximum at counts for every mode wereset to get the proper calibration at images. The unique way to check if the values of gain and readout noise are close to those provided by the manufacturer is from the images taken with CAMELOT2. A set of bias and ats images were taken and the values of gain and readout noise for the common observing modes were measured. This test makes sure that the results obtained are very similar to those provided in the datasheet of the CCD and, therefore, it is not su ering degradation. Despite the CCD is cooled to -105ºC, we have tested that the dark current is low enough and does not represent a high noise contribution. Again, many dark images with increasing exposure times were taken and analyzed. We found that, even in images with long exposure times (30 minutes), the dark current contribution is negligible and it is no necessary to take calibration dark images.The efect of the shutter opening/closin, time has been analyzed. This mechanical partof the camera blocks a tiny fraction of light at the beginning and at the end of the exposures.A set of images with very low exposure time were taken. In the very  rst images is clearlyseen the pattern of the shutter. It shows radial structure and depends on the polar angle inthe image. It is hard to  x its e ects and the best way to minimize them is to take scienceimages with exposure times longer than the total time the shutter takes to open and close.The PSF shape of the stars in all the surface of the detector was checked. A set of starsin images with di erent  lters were selected along the  eld of view. The ellipticity of thesestars were represented versus their position in the CCD, trying to  gure out where comes rom the miss alignment. Further research is needed to solve this problem although ourresults point to a miss alignment between the primary and secondary mirrors.With the data provided by the previous sections an update of the exposure time calculatorwas made. Due to all the factor involved in the process of taking an astronomicalimage, it has not been possible to get the exact star lux, sky  lux and the signal to noiseratio as they appear in a real image. It has been bounded the error sources and changeswill be made. Finally, a practical test has been carried out using the previous results. Despite that the IAC80 is a small telescope, it is possible to obtain low-brightness images with the proper observation strategy. In this case, after 85 hour of observations, a low-brightness image of NGC1035 and its companion DF4 was obtained. The images were taken in SDSS rgi lters following a precise dithering pattern. After obtaining the images, an optimized datareduction procedure was applied paying special attention to systematic errors, telescopemirrors dirt and CCD pixel to pixel response. To ful ll this, a at image was made usingthe science images themselves. The results are images with a limit surface magnitude nearto 29 magnitudes per arcsecond2 that can highly contribute to relevant current researchessuch as the presence of a galaxy lacking dark matter.Concluding this summary, small telescopes can still contribute to astronomy speciallytaking into account that they can o er more observation time per target at a lower costas compared with their big brothers. The price to pay is that more nights are needed forsome given projects. Finally, to reach good science results it is necessary to know all theparameters and characteristics about the detector like linearity, gain, noise sources andother particularities and prepare well the observations.
YR 2021
FD 2021
LK http://riull.ull.es/xmlui/handle/915/23402
UL http://riull.ull.es/xmlui/handle/915/23402
LA es
DS Repositorio institucional de la Universidad de La Laguna
RD 22-nov-2024