RT info:eu-repo/semantics/article T1 Suitability of used frying oil for co-processing with atmospheric gas oil A1 Paz Carmona, Héctor de A1 Horáček, J. A1 Brito Alayón, Andrea A1 Macías Hernández, José Juan K1 Co-hydroprocessing K1 Use frying oil K1 Atmospheric gas oil K1 Hydrodesulfurization K1 Hydrodenitrogenation K1 Product properties AB This work study the catalytic co-hydroprocessing of used frying oil (UFO) with atmospheric gas oil (AGO), paying particular attention to the effect of UFO on the hydrodesulfurization (HDS) and hydrodenitrogenation (HDN) efficiency, the products selectivities and its influence on fuel properties. Hydrotreating experiments were performed in a pilot plant for diesel hydrodesulphurization using a commercial catalyst of NiMo/Al2O3, temperature 320–350 °C, pressure 5.5 MPa, WHSV 2 h-1, UFO content 20–50 wt% and H2/feed ratio 500–1200 NL/L. At the operating conditions used, a total conversion of the triglycerides of UFO was obtained with a 96–99% sulfur elimination. This produced a slightly increase of the HDS/HDN rates during the co-processing, without irreversible effects over its activity and important variation in some properties such as cetane index, density 15 °C or kinematic viscosity 40 °C. The main products obtained were paraffins with 15 and 17 atoms of carbons and light gases such as CO2 and CH4, which imply that the catalyst used stimulates decarboxylation reactions in detriment of hydrodeoxygenation reactions. SN 0016-2361 YR 2018 FD 2018 LK http://riull.ull.es/xmlui/handle/915/35629 UL http://riull.ull.es/xmlui/handle/915/35629 LA en DS Repositorio institucional de la Universidad de La Laguna RD 18-nov-2024