Mostrar el registro sencillo del ítem
Estudio y diseño de un recinto para impresora 3D con control de atmósfera
dc.contributor.advisor | Rivera López, Fernando | |
dc.contributor.advisor | Valido García, José Antonio | |
dc.contributor.author | Hernández Mederos, Joel | |
dc.date.accessioned | 2019-10-15T13:10:22Z | |
dc.date.available | 2019-10-15T13:10:22Z | |
dc.date.issued | 2019 | |
dc.identifier.uri | http://riull.ull.es/xmlui/handle/915/16496 | |
dc.description.abstract | El objetivo de este proyecto es diseñar un recinto con control de atmósfera para una impresora 3D para tener controlado el ambiente que rodea la pieza que está siendo impresa. Para conseguirlo, el recinto deberá tener aislamiento acústico y térmico además de un sistema de refrigeración y monitoreo de la temperatura en su interior. Este proyecto intenta reflejar los conocimientos obtenidos durante el desarrollo del Grado en Ingeniería Mecánica en la Universidad de La Laguna y fue creado con el objetivo de dar solución a uno de los problemas de la tecnología FDM. En algunos materiales utilizados en este tipo de fabricación, como el ABS o el PC, pueden aparecer defectos, como el Warping y/o el Cracking debido a la contracción del material cuando se empieza a enfriar, además, cuando el material se funde, emite gases que pueden ser peligrosos para las personas y para el medio ambiente. | es |
dc.description.abstract | The aim of this project is to design an enclosure with controlled atmosphere for a 3D printer to control the environment around the piece that is being printed. In order to do that, the enclosure shall have acoustic and thermal insulation along with a cooling system and monitoring of temperature inside the enclosure. This project intends to reflect the knowledge obtained along the development of the Mechanical Engineering Degree in University of La Laguna and was created with the objective of give solution to one of the problems of the FDM technology. In some materials used in this type of manufacturing, like ABS or PC, when a piece made of this material is being printed, can appear issues like the Warping and/or Cracking and they are produced because of the contraction of the material when it cools down, besides, when the material is fused it, emit fumes which can be dangerous for the human ant the environment. | en |
dc.format.mimetype | application/pdf | |
dc.language.iso | es | |
dc.rights | Licencia Creative Commons (Reconocimiento-No comercial-Sin obras derivadas 4.0 Internacional) | |
dc.rights.uri | https://creativecommons.org/licenses/by-nc-nd/4.0/deed.es_ES | |
dc.subject | Impresión 3D | |
dc.subject | Calentamiento | |
dc.subject | PLA | |
dc.title | Estudio y diseño de un recinto para impresora 3D con control de atmósfera | |
dc.type | info:eu-repo/semantics/bachelorThesis |