Sistema de riego inteligente de bajo coste
Author
Hernández Rodríguez, CarloDate
2019Abstract
El proyecto desarrollado se centra en la implementación un sistema de
comunicaciones alámbrico cuya aplicación principal es servir de sistema de riego
inteligente para obtener datos de sensores y actuar sobre electro válvulas. Este proyecto
se basará en el proyecto “Sistema de riego inteligente de bajo coste”, realizado por Doña
Yaiza Tejera Fumero y presentado en julio de 2018.
Para implementar este sistema de comunicación se desarrollará una placa de
circuitos impresos, que se utilizará como módem. El circuito electrónico del módem se
basará en el circuito diseñado en el proyecto anterior, modificando y añadiendo algunos
componentes que le darán al diseño nuevas capacidades. Entre estas modificaciones
destaca la inclusión de una electroválvula que será controlada mediante la placa Arduino
UNO utilizada como esclavo y un puente en H para conseguir dos sentidos de giro de
manera sencilla.
Por último, se realizará una conclusión en la que se mostrarán los puntos débiles
de la implementación del sistema y se destacarán los aspectos positivos que tendría el
proyecto y el ahorro que se podría producir si se continúa desarrollando la idea del
proyecto. The project developed is to implement a wire communication system to carry out
an automatic irrigation system. This project will be based on the previous project
“Sistema de riego inteligente de bajo coste”, done by Miss Yaiza Tejera Fumero and
shown in July, 2018.
To carry out this communication system it will be developed a print circuit board
(PCB) used as a modem. The modem electronic circuit will be based on the design made
in the previous project, changing and adding some components that will give the design
new capabilities. Among these changes it can find the addition of an electrovalve that
will be controlled with Arduino UNO board, used as slave. Another addition is the H
Bridge as controller for the electrovalve. With these component it is easy to control de
electrovalve with two directions of rotation.
Finally, the weaknesses of the implementation of the system will be shown and
the positive aspects that the project would have and the savings that could be produced
if the project idea continues to be developed will be highlighted.