Diseño y análisis de la estructura del satélite TEIDESAT-I
Author
Chiocca González, ValeriaDate
2022Abstract
El objeto de estudio de este Trabajo de Fin de Grado (TFG) es la estructura del
nanosatélite tipo CubeSat del proyecto TEIDESAT-I.
A la estructura se le realizarán una serie de modificaciones con el fin de asegurar su
integridad e introducir nuevos componentes necesarios para el funcionamiento del CubeSat.
Una vez realizadas estas modificaciones, se realiza el estudio de una de las uniones más
críticas, la de los marcos con las vigas, con el fin de determinar cuál será la resistencia del
tornillo necesaria para soportar las solicitaciones.
Una vez finalizada la fase de diseño se procedió a la realización de un prototipo con
impresión 3D y a la verificación de la misma mediante el uso de análisis con elementos finitos
de la estructura (FEM), entre otros.
Concluidas las fases de diseño y de verificación se procedió a presupuestación de la
estructura con un taller de mecanizado de la isla. The object of study of this Final Degree Project is the structure of the CubeSat
nanosatellite of the TEIDESAT-I project.
A series of modifications will be made to the structure in order to ensure its integrity
and introduce new components necessary for the operation of the CubeSat. Once these
modifications have been made, a study of one of the most critical joints, that of the frames
with the beams, will be carried out in order to determine the strength of the bolts needed to
withstand the stresses.
Once the design phase was completed, a prototype was made using 3D printing and a
finite element analysis of the structure was carried out.
Once the design and verification phases were completed the structure was priced by a
machining workshop on the island.